THE CUTLASS BEARING TOOL IS A HYDRAULIC DRIVEN TOOL FOR REMOVING AND INSTALLING THE CUTLASS BEARING WITHOUT REMOVING THE PROPELLER SHAFT, RUDDER OR STRUT.
WHY SPEND HOURS HEATING AND BEATING THE CUTLASS BEARING WHEN YOU CAN REMOVE AND INSTALL WITHOUT ANY STRESS OR DAMAGE TO THE STRUT SUPPORT OR YOURSELF. THIS TOOL CAN REMOVE AND
INSTALL A BEARING IN MINUTES RATHER THAN HOURS OR DAYS ALLOWING TIME TO DO OTHER MAINTENANCE ITEMS ON THE BOAT.
THIS TOOL CAN HANDLE UP TO 3-1/8 INCH OUTSIDE DIAMETER BEARING ON ANY SIZE SHAFT. THE TOOL HAS A 24-TON CAPACITY. THIS TOOL IS
IDEAL FOR REPAIR YARDS. SOLD AS A COMPLETE KIT OR INDIVIDUAL PARTS
PART NUMBERS | DESCRIPTION |
---|---|
KHCB-1000 | COMPLETE REPAIR YARD KIT (hand pump) - closed yoke(1), open yoke(1), hollow hydraulic cylinders(2), cylinder support plate(1), threaded rod assemblies(2), collet pairs(7), horseshoes(11) (3/4in to 3in), collet straps(2), horseshoe clips(4), hydraulic hand pump(1), 15ft hose assembly(1), 2ft hose assembly(2), storage box. |
KHCB-1001 | COMPLETE REPAIR YARD KIT (electric power unit) - same as above except hydraulic hand pump is replaced with (1) 110VAC electric hydraulic power unit with remote control. |
KHCB-1002 | HYDRAULIC TOOL KIT (hand pump) - closed yoke(1), open yoke(1), hollow hydraulic cylinders(2), cylinder support plate(1), threaded rod assemblies(2), hydraulic hand pump(1), 15ft hose assembly(1), 2ft hose assembly(2), storage box. |
KHCB-1003 | HYDRAULIC TOOL KIT (electric power unit)- same as KHCB-1002 except hand pump is replaced with electric power unit and remote control. |
KCS-100 | COLLET KIT - collets are the paired halves that fit around the propeller shaft that pushes on the bearing. Sizes contained in kit: 1-1/4, 1-1/2, 1-3/4, 2, 2-3/8, 2-5/8, 3-1/8 bearing OD |
KHS-101 | HORSESHOE KIT - horseshoes are the parts that push across the collets and presses against the strut. Sizes contained in kit: 3/4, 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-3/4, 2, 2-3/8, 2-5/8, 3 (in.) |
KHP-200 | HYDRAULIC HAND PUMP KIT - contains hand pump w/ quick disconnect coupling |
KHP-201 | HYDRAULIC POWER UNIT KIT - contains power unit(115VAC), w/ quick disconnect coupling |
KHA-300 | HOSE ASSEMBLY KIT - 15ft. hose assembly w/ quick disconnects |
KHA-301 | HOSE ASSEMBLY KIT - 2ft. hose assembly w/ quick disconnects |
KHC-400 | COUPLING KIT - quick disconnects, both sides |